|
SuperLU
5.2.2
|
Computes an approximate solutions of linear equations A*X=B or A'*X=B. More...
#include "slu_zdefs.h"
Functions | |
| void | zgsisx (superlu_options_t *options, SuperMatrix *A, int *perm_c, int *perm_r, int *etree, char *equed, double *R, double *C, SuperMatrix *L, SuperMatrix *U, void *work, int lwork, SuperMatrix *B, SuperMatrix *X, double *recip_pivot_growth, double *rcond, GlobalLU_t *Glu, mem_usage_t *mem_usage, SuperLUStat_t *stat, int *info) |
Copyright (c) 2003, The Regents of the University of California, through Lawrence Berkeley National Laboratory (subject to receipt of any required approvals from U.S. Dept. of Energy)
All rights reserved.
The source code is distributed under BSD license, see the file License.txt at the top-level directory.
– SuperLU routine (version 4.2) – Lawrence Berkeley National Laboratory. November, 2010 August, 2011
| void zgsisx | ( | superlu_options_t * | options, |
| SuperMatrix * | A, | ||
| int * | perm_c, | ||
| int * | perm_r, | ||
| int * | etree, | ||
| char * | equed, | ||
| double * | R, | ||
| double * | C, | ||
| SuperMatrix * | L, | ||
| SuperMatrix * | U, | ||
| void * | work, | ||
| int | lwork, | ||
| SuperMatrix * | B, | ||
| SuperMatrix * | X, | ||
| double * | recip_pivot_growth, | ||
| double * | rcond, | ||
| GlobalLU_t * | Glu, | ||
| mem_usage_t * | mem_usage, | ||
| SuperLUStat_t * | stat, | ||
| int * | info | ||
| ) |
Purpose
ZGSISX computes an approximate solutions of linear equations A*X=B or A'*X=B, using the ILU factorization from zgsitrf(). An estimation of the condition number is provided. The routine performs the following steps:
1. If A is stored column-wise (A->Stype = SLU_NC):
1.1. If options->Equil = YES or options->RowPerm = LargeDiag_MC64, scaling
factors are computed to equilibrate the system:
options->Trans = NOTRANS:
diag(R)*A*diag(C) *inv(diag(C))*X = diag(R)*B
options->Trans = TRANS:
(diag(R)*A*diag(C))**T *inv(diag(R))*X = diag(C)*B
options->Trans = CONJ:
(diag(R)*A*diag(C))**H *inv(diag(R))*X = diag(C)*B
Whether or not the system will be equilibrated depends on the
scaling of the matrix A, but if equilibration is used, A is
overwritten by diag(R)*A*diag(C) and B by diag(R)*B
(if options->Trans=NOTRANS) or diag(C)*B (if options->Trans
= TRANS or CONJ). 1.2. Permute columns of A, forming A*Pc, where Pc is a permutation
matrix that usually preserves sparsity.
For more details of this step, see sp_preorder.c. 1.3. If options->Fact != FACTORED, the LU decomposition is used to
factor the matrix A (after equilibration if options->Equil = YES)
as Pr*A*Pc = L*U, with Pr determined by partial pivoting.1.4. Compute the reciprocal pivot growth factor.
1.5. If some U(i,i) = 0, so that U is exactly singular, then the
routine fills a small number on the diagonal entry, that is
U(i,i) = ||A(:,i)||_oo * options->ILU_FillTol ** (1 - i / n),
and info will be increased by 1. The factored form of A is used
to estimate the condition number of the preconditioner. If the
reciprocal of the condition number is less than machine precision,
info = A->ncol+1 is returned as a warning, but the routine still
goes on to solve for X. 1.6. The system of equations is solved for X using the factored form
of A.1.7. options->IterRefine is not used
1.8. If equilibration was used, the matrix X is premultiplied by
diag(C) (if options->Trans = NOTRANS) or diag(R)
(if options->Trans = TRANS or CONJ) so that it solves the
original system before equilibration. 1.9. options for ILU only
1) If options->RowPerm = LargeDiag_MC64, MC64 is used to scale and
permute the matrix to an I-matrix, that is Pr*Dr*A*Dc has
entries of modulus 1 on the diagonal and off-diagonal entries
of modulus at most 1. If MC64 fails, dgsequ() is used to
equilibrate the system.
( Default: LargeDiag_MC64 )
2) options->ILU_DropTol = tau is the threshold for dropping.
For L, it is used directly (for the whole row in a supernode);
For U, ||A(:,i)||_oo * tau is used as the threshold
for the i-th column.
If a secondary dropping rule is required, tau will
also be used to compute the second threshold.
( Default: 1e-4 )
3) options->ILU_FillFactor = gamma, used as the initial guess
of memory growth.
If a secondary dropping rule is required, it will also
be used as an upper bound of the memory.
( Default: 10 )
4) options->ILU_DropRule specifies the dropping rule.
Option Meaning
====== ===========
DROP_BASIC: Basic dropping rule, supernodal based ILUTP(tau).
DROP_PROWS: Supernodal based ILUTP(p,tau), p = gamma*nnz(A)/n.
DROP_COLUMN: Variant of ILUTP(p,tau), for j-th column,
p = gamma * nnz(A(:,j)).
DROP_AREA: Variation of ILUTP, for j-th column, use
nnz(F(:,1:j)) / nnz(A(:,1:j)) to control memory.
DROP_DYNAMIC: Modify the threshold tau during factorizaion:
If nnz(L(:,1:j)) / nnz(A(:,1:j)) > gamma
tau_L(j) := MIN(tau_0, tau_L(j-1) * 2);
Otherwise
tau_L(j) := MAX(tau_0, tau_L(j-1) / 2);
tau_U(j) uses the similar rule.
NOTE: the thresholds used by L and U are separate.
DROP_INTERP: Compute the second dropping threshold by
interpolation instead of sorting (default).
In this case, the actual fill ratio is not
guaranteed smaller than gamma.
DROP_PROWS, DROP_COLUMN and DROP_AREA are mutually exclusive.
( Default: DROP_BASIC | DROP_AREA )
5) options->ILU_Norm is the criterion of measuring the magnitude
of a row in a supernode of L. ( Default is INF_NORM )
options->ILU_Norm RowSize(x[1:n])
================= ===============
ONE_NORM ||x||_1 / n
TWO_NORM ||x||_2 / sqrt(n)
INF_NORM max{|x[i]|}
6) options->ILU_MILU specifies the type of MILU's variation.
= SILU: do not perform Modified ILU;
= SMILU_1 (not recommended):
U(i,i) := U(i,i) + sum(dropped entries);
= SMILU_2:
U(i,i) := U(i,i) + SGN(U(i,i)) * sum(dropped entries);
= SMILU_3:
U(i,i) := U(i,i) + SGN(U(i,i)) * sum(|dropped entries|);
NOTE: Even SMILU_1 does not preserve the column sum because of
late dropping.
( Default: SILU )
7) options->ILU_FillTol is used as the perturbation when
encountering zero pivots. If some U(i,i) = 0, so that U is
exactly singular, then
U(i,i) := ||A(:,i)|| * options->ILU_FillTol ** (1 - i / n).
( Default: 1e-2 ) 2. If A is stored row-wise (A->Stype = SLU_NR), apply the above algorithm
to the transpose of A: 2.1. If options->Equil = YES or options->RowPerm = LargeDiag_MC64, scaling
factors are computed to equilibrate the system:
options->Trans = NOTRANS:
diag(R)*A*diag(C) *inv(diag(C))*X = diag(R)*B
options->Trans = TRANS:
(diag(R)*A*diag(C))**T *inv(diag(R))*X = diag(C)*B
options->Trans = CONJ:
(diag(R)*A*diag(C))**H *inv(diag(R))*X = diag(C)*B
Whether or not the system will be equilibrated depends on the
scaling of the matrix A, but if equilibration is used, A' is
overwritten by diag(R)*A'*diag(C) and B by diag(R)*B
(if trans='N') or diag(C)*B (if trans = 'T' or 'C'). 2.2. Permute columns of transpose(A) (rows of A),
forming transpose(A)*Pc, where Pc is a permutation matrix that
usually preserves sparsity.
For more details of this step, see sp_preorder.c. 2.3. If options->Fact != FACTORED, the LU decomposition is used to
factor the transpose(A) (after equilibration if
options->Fact = YES) as Pr*transpose(A)*Pc = L*U with the
permutation Pr determined by partial pivoting.2.4. Compute the reciprocal pivot growth factor.
2.5. If some U(i,i) = 0, so that U is exactly singular, then the
routine fills a small number on the diagonal entry, that is
U(i,i) = ||A(:,i)||_oo * options->ILU_FillTol ** (1 - i / n).
And info will be increased by 1. The factored form of A is used
to estimate the condition number of the preconditioner. If the
reciprocal of the condition number is less than machine precision,
info = A->ncol+1 is returned as a warning, but the routine still
goes on to solve for X. 2.6. The system of equations is solved for X using the factored form
of transpose(A).2.7. If options->IterRefine is not used.
2.8. If equilibration was used, the matrix X is premultiplied by
diag(C) (if options->Trans = NOTRANS) or diag(R)
(if options->Trans = TRANS or CONJ) so that it solves the
original system before equilibration.See supermatrix.h for the definition of 'SuperMatrix' structure.
Arguments
options (input) superlu_options_t*
The structure defines the input parameters to control
how the LU decomposition will be performed and how the
system will be solved.A (input/output) SuperMatrix*
Matrix A in A*X=B, of dimension (A->nrow, A->ncol). The number
of the linear equations is A->nrow. Currently, the type of A can be:
Stype = SLU_NC or SLU_NR, Dtype = SLU_Z, Mtype = SLU_GE.
In the future, more general A may be handled. On entry, If options->Fact = FACTORED and equed is not 'N',
then A must have been equilibrated by the scaling factors in
R and/or C.
On exit, A is not modified
if options->Equil = NO, or
if options->Equil = YES but equed = 'N' on exit, or
if options->RowPerm = NO. Otherwise, if options->Equil = YES and equed is not 'N',
A is scaled as follows:
If A->Stype = SLU_NC:
equed = 'R': A := diag(R) * A
equed = 'C': A := A * diag(C)
equed = 'B': A := diag(R) * A * diag(C).
If A->Stype = SLU_NR:
equed = 'R': transpose(A) := diag(R) * transpose(A)
equed = 'C': transpose(A) := transpose(A) * diag(C)
equed = 'B': transpose(A) := diag(R) * transpose(A) * diag(C). If options->RowPerm = LargeDiag_MC64, MC64 is used to scale and permute
the matrix to an I-matrix, that is A is modified as follows:
P*Dr*A*Dc has entries of modulus 1 on the diagonal and
off-diagonal entries of modulus at most 1. P is a permutation
obtained from MC64.
If MC64 fails, zgsequ() is used to equilibrate the system,
and A is scaled as above, but no permutation is involved.
On exit, A is restored to the orginal row numbering, so
Dr*A*Dc is returned.perm_c (input/output) int*
If A->Stype = SLU_NC, Column permutation vector of size A->ncol,
which defines the permutation matrix Pc; perm_c[i] = j means
column i of A is in position j in A*Pc.
On exit, perm_c may be overwritten by the product of the input
perm_c and a permutation that postorders the elimination tree
of Pc'*A'*A*Pc; perm_c is not changed if the elimination tree
is already in postorder. If A->Stype = SLU_NR, column permutation vector of size A->nrow,
which describes permutation of columns of transpose(A)
(rows of A) as described above.perm_r (input/output) int*
If A->Stype = SLU_NC, row permutation vector of size A->nrow,
which defines the permutation matrix Pr, and is determined
by MC64 first then followed by partial pivoting.
perm_r[i] = j means row i of A is in position j in Pr*A. If A->Stype = SLU_NR, permutation vector of size A->ncol, which
determines permutation of rows of transpose(A)
(columns of A) as described above. If options->Fact = SamePattern_SameRowPerm, the pivoting routine
will try to use the input perm_r, unless a certain threshold
criterion is violated. In that case, perm_r is overwritten by a
new permutation determined by partial pivoting or diagonal
threshold pivoting.
Otherwise, perm_r is output argument.etree (input/output) int*, dimension (A->ncol)
Elimination tree of Pc'*A'*A*Pc.
If options->Fact != FACTORED and options->Fact != DOFACT,
etree is an input argument, otherwise it is an output argument.
Note: etree is a vector of parent pointers for a forest whose
vertices are the integers 0 to A->ncol-1; etree[root]==A->ncol.equed (input/output) char*
Specifies the form of equilibration that was done.
= 'N': No equilibration.
= 'R': Row equilibration, i.e., A was premultiplied by diag(R).
= 'C': Column equilibration, i.e., A was postmultiplied by diag(C).
= 'B': Both row and column equilibration, i.e., A was replaced
by diag(R)*A*diag(C).
If options->Fact = FACTORED, equed is an input argument,
otherwise it is an output argument.R (input/output) double*, dimension (A->nrow)
The row scale factors for A or transpose(A).
If equed = 'R' or 'B', A (if A->Stype = SLU_NC) or transpose(A)
(if A->Stype = SLU_NR) is multiplied on the left by diag(R).
If equed = 'N' or 'C', R is not accessed.
If options->Fact = FACTORED, R is an input argument,
otherwise, R is output.
If options->Fact = FACTORED and equed = 'R' or 'B', each element
of R must be positive.C (input/output) double*, dimension (A->ncol)
The column scale factors for A or transpose(A).
If equed = 'C' or 'B', A (if A->Stype = SLU_NC) or transpose(A)
(if A->Stype = SLU_NR) is multiplied on the right by diag(C).
If equed = 'N' or 'R', C is not accessed.
If options->Fact = FACTORED, C is an input argument,
otherwise, C is output.
If options->Fact = FACTORED and equed = 'C' or 'B', each element
of C must be positive.L (output) SuperMatrix*
The factor L from the factorization
Pr*A*Pc=L*U (if A->Stype SLU_= NC) or
Pr*transpose(A)*Pc=L*U (if A->Stype = SLU_NR).
Uses compressed row subscripts storage for supernodes, i.e.,
L has types: Stype = SLU_SC, Dtype = SLU_Z, Mtype = SLU_TRLU.U (output) SuperMatrix*
The factor U from the factorization
Pr*A*Pc=L*U (if A->Stype = SLU_NC) or
Pr*transpose(A)*Pc=L*U (if A->Stype = SLU_NR).
Uses column-wise storage scheme, i.e., U has types:
Stype = SLU_NC, Dtype = SLU_Z, Mtype = SLU_TRU.work (workspace/output) void*, size (lwork) (in bytes)
User supplied workspace, should be large enough
to hold data structures for factors L and U.
On exit, if fact is not 'F', L and U point to this array.lwork (input) int
Specifies the size of work array in bytes.
= 0: allocate space internally by system malloc;
> 0: use user-supplied work array of length lwork in bytes,
returns error if space runs out.
= -1: the routine guesses the amount of space needed without
performing the factorization, and returns it in
mem_usage->total_needed; no other side effects.See argument 'mem_usage' for memory usage statistics.
B (input/output) SuperMatrix*
B has types: Stype = SLU_DN, Dtype = SLU_Z, Mtype = SLU_GE.
On entry, the right hand side matrix.
If B->ncol = 0, only LU decomposition is performed, the triangular
solve is skipped.
On exit,
if equed = 'N', B is not modified; otherwise
if A->Stype = SLU_NC:
if options->Trans = NOTRANS and equed = 'R' or 'B',
B is overwritten by diag(R)*B;
if options->Trans = TRANS or CONJ and equed = 'C' of 'B',
B is overwritten by diag(C)*B;
if A->Stype = SLU_NR:
if options->Trans = NOTRANS and equed = 'C' or 'B',
B is overwritten by diag(C)*B;
if options->Trans = TRANS or CONJ and equed = 'R' of 'B',
B is overwritten by diag(R)*B.X (output) SuperMatrix*
X has types: Stype = SLU_DN, Dtype = SLU_Z, Mtype = SLU_GE.
If info = 0 or info = A->ncol+1, X contains the solution matrix
to the original system of equations. Note that A and B are modified
on exit if equed is not 'N', and the solution to the equilibrated
system is inv(diag(C))*X if options->Trans = NOTRANS and
equed = 'C' or 'B', or inv(diag(R))*X if options->Trans = 'T' or 'C'
and equed = 'R' or 'B'.recip_pivot_growth (output) double*
The reciprocal pivot growth factor max_j( norm(A_j)/norm(U_j) ).
The infinity norm is used. If recip_pivot_growth is much less
than 1, the stability of the LU factorization could be poor.rcond (output) double*
The estimate of the reciprocal condition number of the matrix A
after equilibration (if done). If rcond is less than the machine
precision (in particular, if rcond = 0), the matrix is singular
to working precision. This condition is indicated by a return
code of info > 0.mem_usage (output) mem_usage_t*
Record the memory usage statistics, consisting of following fields:
stat (output) SuperLUStat_t*
Record the statistics on runtime and floating-point operation count.
See slu_util.h for the definition of 'SuperLUStat_t'.info (output) int*
= 0: successful exit
< 0: if info = -i, the i-th argument had an illegal value
> 0: if info = i, and i is
<= A->ncol: number of zero pivots. They are replaced by small
entries due to options->ILU_FillTol.
= A->ncol+1: U is nonsingular, but RCOND is less than machine
precision, meaning that the matrix is singular to
working precision. Nevertheless, the solution and
error bounds are computed because there are a number
of situations where the computed solution can be more
accurate than the value of RCOND would suggest.
> A->ncol+1: number of bytes allocated when memory allocation
failure occurred, plus A->ncol.

1.8.6